The Myler Two Ring Combination Low Port Snaffle Sweet Iron bit with Copper Inlay has been designed for the young, green horse with a steady disposition or the older horse beginning training or switching disciplines. It is also helpful for horses working in a level one mouthpiece who are showing resistance.Mouthpiece: MB04 (small 1/4" port allows for more tongue relief)Sizes: 4 1/2", 4 3/4", 5"Ring type: 4 3/4" Two Ring ShankMetal type: Sweet Iron with copper inlayLevel: 2
The Myler Combination Bits are unique bits that work by increasing pressure on different parts of the head, starting with gentle pressure on the nose and ending, if necessary, with pressure in the mouth.
How it works:The noseband and chin strap are connected through the uniquely designed purchaseMultiple rein positions: the big ring allows direct rein action, the second ring (bottom on the two ring combo, center on the three ring combo) is for a fixed rein with a mild degree of leverage, and the third ring (in the three ring combo) allows for a moderate degree of leverageWhen pressure is applied, the nose and chin straps tighten and gentle poll pressure is appliedThe mouthpiece has a 1" slide which works as a loose mouthpiece or warning, not a gag actionThe stop engages the mouthpiece when the other pressures have not produced the desired reactionThe support string keeps the noseband level across the nose, even if the chin strap is loosened
Level 2 bits provide tongue relief with a small port or flexible mouthpiece which rotates on the tongue to apply some pressure and collapses to form a U instead of a V, protecting the lips and bars from being pinched. The bit also curves to allow more room for the tongue which can help to prevent resistance.
Resistance is the horse's way of communicating discomfort. A horse may demonstrate resistance through one or more behaviors that are consistently repeated in relation to the bit. Recognizing the signs of resistance is critical to knowing when there is a problem. Some of these signs include:Going behind the bitGoing above the bitChewing, overactive mouth, tongue out of the mouthRunning through the bit, pulling or not stoppingHeavy on the forehand, leaning on the bitPutting the tongue over the bitSucking the tongue into the back of the throat
Myler bits have many unique features which allow your horse to work without resistance:Independent side movement: Many Myler bits have a barrel in the center of the mouthpiece that acts as a bushing, allowing each side of the bit to move independently of the other. When the rider engages one fixed rein using a Myler bit with Independent Side Movement, the rider lifts only one side of the bit, giving a very clear, precise signal to the horse.Curved Mouthpiece: Myler mouthpieces have a distinctive curve. The curve creates more room for the tongue to pass under the bit so the horse can swallow more freely as opposed to a bit that goes straight across the mouth.Moutpiece Thickness: Most Myler mouthpieces are 7/16" thick (11.11mm), a thickness that allows the bit to fit comfortably in the horse's mouth. In English bits, mouthpieces measure 14mm at the cheek and taper to 11.11mm inside the mouth. This provides a slightly larger surface area on the bars and lips, but still provides ample room for the tongue inside the mouth.Mouthpiece Metals: All Myler mouthpieces with English style cheek pieces are made of stainless steel with copper inlay (with the exception of the loose ring which offers mouthpieces in both stainless steel and sweet iron). Myler Western bits, combination bits and cradle bits are made of sweet iron with copper inlay. Sweet Iron oxidizes when exposed to moisture, releasing sweet taste. The sweet iron mouthpiece will turn grey after a few uses.Independent Swivel cheek: The independent swivel cheek is a patented Myler feature offered on a limited number of cheekpieces. Myler shanks are independent of the mouthpiece and the independent swivel cheek means that the purchase is also independent of the shank; when the rider engages one rein, the shank moves but the purchase has a slight swivel to is so it can give a little against the horse's face as the bit moves below it. The independent swivel cheek is offered on combination bits, the parelli shank bits the HBT and the flat shank.
Please Note: If you compete, check with your sport's governing body to confirm which bits are legal for your particular event.